Plan recessed Eurofase infrared patio heating by choosing the heater, ceiling-mounting system and controls separately—or start with an official Eurofase bundle. This collection brings together eligible EF15, EF30, EF40, EF50 and EF60 heater families, manufacturer-specific flush-mount frames and Type-X enclosure accessories for covered patios and architecturally finished ceilings. Do not infer compatibility from heater wattage or a shared collection: confirm each model, trim/frame, enclosure and ceiling assembly against current manufacturer installation documentation.
1. Choose a complete recessed heating package
-
BUNDLE2 — Two stainless EF60 heaters with recessed mounting and Wi-Fi; confirm any required enclosure separately.
-
BUNDLE3 — Two stainless EF60 heaters with recessed mounting; controls specified separately.
-
BUNDLE4 — Two stainless EF60 heaters with Wi-Fi and Type-X enclosure components; approved ceiling assembly still needs project review.
-
BUNDLE12 — Dual EF60 recessed + smart Wi-Fi: a manufacturer-defined two-heater starting point for recessed smart installations. Confirm the exact current package contents; do not assume a Type-X enclosure is included.
-
BUNDLE13 — Dual EF60 recessed, controls selected separately: appropriate when the installer is specifying a dedicated switching or automation architecture.
-
BUNDLE14 — Dual EF60 recessed + Wi-Fi + Type-X enclosure path: the manufacturer bundle description includes recessed frames and FRB enclosure components. Its label does not guarantee an approved fire-resistance rating for the completed ceiling.
-
BUNDLE7 (39-inch stainless), BUNDLE8 (61-inch black), BUNDLE9 (61-inch white) and BUNDLE10 (61-inch stainless) — recessed mounting/enclosure accessory packages, not heater systems. BUNDLE5 and BUNDLE6 remain unlisted pending manufacturer confirmation of size/finish.
2. Configure a recessed heating project à la carte
Additional heater families: Eurofase documentation identifies recessed paths for EF15 and EF50 in the 39-inch-class family and EF30 in the 61-inch-class family. Verify exact heater/frame compatibility, mounting dimensions, clearance and approved finish options from the current manufacturer manual before specifying.
EF40 — 4,000 W at 240 V: choose the EF40 heater in Black, Stainless Steel or White, then review the separately sold EF39FMPF 39-inch-class recessed frame and EF39FRBC Type-X enclosure if required by the approved design.
EF60 — 6,000 W at 240 V: choose the EF60 heater, then review the EF61FMPF 61-inch-class recessed frame and EF61FRBC Type-X enclosure where specified. Oversized or Parcel+ handling may apply to enclosure freight.
Important sizing detail: the "39-inch" and "61-inch" accessory names refer to heater classes—not the flush-mount frame's outside dimensions. Use Eurofase's current frame, enclosure and ceiling-cutout drawings before rough-in.
3. Choose the electrical and control path
Heater-only and mounting-accessory prices do not automatically include a Wi-Fi controller, manual switch, contactor, upstream disconnect, branch-circuit wiring or installation. See manufacturer-native Wi-Fi heating or RadioRA 3 and automation heating after the electrical layout and desired zones have been defined. Switch and controller load compatibility must be confirmed for each exact heater and wiring arrangement; a 20 A wall switch is not presumed suitable for either heater simply because it appears in the same collection.
4. Check the ceiling assembly before ordering
Coordinate mounting height, ceiling type and cavity depth, combustible-material clearances, electrical supply, ventilation, access and weather exposure with the manufacturer and licensed installer. A Type-X drywall enclosure component does not automatically make an untested ceiling a rated fire-resistance assembly. The project authority and installer must verify any required approved assembly and installation details.
For a dealer quotation, supply a patio or reflected-ceiling sketch, proposed heater locations, mounting height, available voltage, desired finish and control preferences. Eurofase manufacturer's specification and installation library is the reference for exact equipment requirements.
New to Eurofase? Start with the outdoor-heating selection guide, or compare manufacturer-defined complete heating systems.
Need help with a complete heating project? Use the Eurofase Heating Dealer Specification Guide for heater, mounting and control planning, and to reach Project Desk with your project requirements. Check the current manufacturer documents and have the installer verify the final electrical and ceiling design.
