Eurofase EF50 5000W 240V Dual-Element Infrared Patio Heater
Eurofase EF50 5000W 240V Dual-Element Infrared Patio Heater
Available to order — ships from incoming stock
Typically ships in 3–6 Business Days (Western Canada) · 4–8 Business Days (Eastern Canada)
SKU:EF50240B
Eurofase EF50 is the manufacturer's 39-inch, 5000 W dual-element medium-wave infrared heater for professional patio and outdoor-heating projects. It provides an intermediate 240 V output choice between the EF40 and EF60. This listing covers standard 304 stainless-steel-bodied, standard-grille models only, not marine-grade or decorative-plate SKUs.
Orderable 240 V heater finishes
| Manufacturer SKU | Finish | Rated output |
|---|---|---|
| EF50240B | Black | 5000 W / 240 V |
| EF50240S | Stainless Steel | 5000 W / 240 V |
| EF50240W | White | 5000 W / 240 V |
Technical specifications — EF50 standard series
| Electrical supply and rated load | 240 V AC; 5000 W total, nominal 20.8 A at 240 V |
|---|---|
| Infrared source | Two quartz elements, 2500 W each; medium-wave technology |
| Manufacturer planning coverage | Approximately 9 × 10 ft (90 sq ft), a planning reference rather than a guaranteed heating result |
| Recommended installation height | 8–10 ft per manufacturer; mounting location and clearances must be verified |
| Body and environmental rating | 304 stainless steel; IPX4, per EF50 series specification |
| Nominal overall length | 39.37 in; allow separate required clearance and bracket projection |
| Mounting | Manufacturer-approved wall or ceiling brackets; separate recessed/flush and pole options require exact accessory and installation confirmation |
| Manufacturer warranty | 3 years, subject to Eurofase terms |
Project selection and associated components
For projects that require a different output or mounting length, compare the EF40 4000 W and EF60 6000 W heaters. Where a 39-inch recessed pathway is intended, review the EF39FMPF mounting frame and installation literature; do not assume that all frames, enclosures or controls are approved for every heater and ceiling assembly.
Special-order planning: Confirm exact mounting and electrical configuration, available supplier stock and freight before promising a delivery date. No stocked quantity, fixed shipping charge or electrical-code approval is implied. All installation, branch-circuit and protective-device selections are the responsibility of the qualified installer.
Official Eurofase documentation
- Eurofase EF50 manufacturer product family and exact-model resources
- EF50240B manufacturer 240 V black-model specification (PDF)
- Eurofase manufacturer installation and technical download library
Hero image, where displayed, illustrates a Eurofase outdoor-heating application and is not an exact finish-specific EF50 SKU rendering.
Finish the EF50 project — mounting and wiring options
For an approved flat-ceiling recessed design, see the Eurofase 39-inch flush-mount frame. Its manufacturer kit includes a short high-temperature whip; choose a separately sold EFHTW 4-wire connection whip only where a longer 4-wire connection is specified by the qualified installer. The existing 3-wire EFHTW-C control-box whips are a different conductor configuration.
For an alternative high or sloped-ceiling installation, consider the EFSMKB telescoping suspension kit; the 66-inch suspension extension is a separate accessory. Suspension mounting and recessed mounting are alternative installation methods, not components to combine automatically.
For dealer projects needing proportional multi-heater zoning, review the EFURCB24 multi-zone relay control box. Lutron RadioRA 2/3 projects may use a suitable control-signal pathway involving the Lutron LMJ-5T-DV-B 0–10 V module, but the complete Eurofase/Lutron design requires confirmation of exact switching, source/sink signal, load protection and safe shutdown. Neither Lutron lighting modules nor decorative dimmers should be connected directly to a heater's mains load.
Project add-ons: cover and control selection
For seasonal protection, consider the Eurofase protective cover, selecting exact EF39CVRB for the EF50 manufacturer heater family. Turn off the breaker, allow the heater to cool and remove the cover before operation. For independently switched patio-heater circuits, explore weatherproof on/off switches; verify the switch, enclosure, rated current and controller design. For engineered dimming with an EFURCB relay panel, consider EFSWTD1–4 timer/dimmer wall controls, sold separately.
These are optional/project-specific items, not automatically required components. Supplier freight, availability and accessory fit must be reviewed for the complete system order.
