Lutron Lumaris Wireless Tape Light Controllers

Source Lutron Lumaris wireless tape light controllers through Simply Controlled for professional RadioRA 3, HomeWorks, under-cabinet, cove, millwork, shelf, toe-kick, vanity, media room, theatre, bar, and architectural lighting-control projects. This collection gives Canadian B2B dealers a focused ordering path for the controller hardware that connects Lumaris tape light to the Lutron control ecosystem.

Use this page when the project already has a Lumaris tape-light direction and you need the correct wireless controller for the tape type. Lumaris controllers act as the driver-controller layer for compatible tape light, allowing intensity, colour temperature, warm-dim behaviour, RGB colour, scenes, schedules, keypads, app control, and system programming to be handled through the appropriate Lutron platform.

Lumaris controllers for tunable white and RGB + tunable white tape light

Lumaris tape-light projects require the correct controller path. Tunable white tape light and RGB + tunable white tape light are not controlled the same way, so dealers should confirm the tape family before selecting the wireless controller, power supply, wiring, connectors, and accessories.

  • Tunable white controllers: use the Lumaris tunable white wireless controller path for compatible tunable white tape-light reels, including warm-dim and adjustable white-light applications.
  • RGB + tunable white controllers: use the Lumaris multi-channel wireless controller path for RGB + tunable white tape light where the project needs colour scenes plus high-quality white light.
  • Clear Connect Type X communication: connect Lumaris tape-light zones into compatible Lutron wireless system programming for scenes, schedules, app control, and keypad operation.
  • Controller-based tape planning: plan each tape-light zone around the approved controller limit, tape length, power method, wiring path, and installation location.
  • Separate power paths: pair the controller with the correct plug-in power supply or hardwired power interface based on the project design.

Why dealers need the right Lumaris controller

The wireless controller is the component that makes Lumaris tape light behave like part of the Lutron system. Without the correct controller, the tape light cannot be properly addressed, programmed, powered, or controlled as part of the intended RadioRA 3 or HomeWorks lighting scene.

  • Correct tape compatibility: match the controller to the Lumaris tape-light family before ordering reels, wire, connectors, and power components.
  • Integrated scene control: bring tape light into keypad scenes, schedules, app control, warm-dim behaviour, colour temperature changes, and RGB scene control where supported.
  • Cleaner project planning: organize each zone around the controller, tape length, power method, wiring route, and service-access plan.
  • Reduced callbacks: avoid mismatched tunable white, RGB + tunable white, wiring, connector, and power-interface combinations.
  • Service and expansion support: source replacement or additional controllers when extending, troubleshooting, or revising an existing Lumaris installation.

Common applications

  • Kitchen under-cabinet lighting: control tunable white tape light for task lighting, evening scenes, and keypad-based presets.
  • Cove and indirect lighting: create architectural light layers that respond to scenes, schedules, colour temperature, and room modes.
  • Millwork and shelving: integrate shelf, cabinet, bar, vanity, closet, and display lighting into the Lutron control system.
  • Toe-kick and accent lighting: add low-level architectural lighting that can participate in pathway, evening, and entertaining scenes.
  • Media rooms and theatres: use RGB + tunable white controller paths for entertainment colour scenes plus everyday white-light control.
  • Service and expansion work: add or replace controllers when a Lumaris tape-light zone is being extended, revised, or repaired.

How to choose the right Lumaris wireless controller

Before ordering, confirm the Lumaris tape-light type, colour-temperature requirement, RGB requirement, compatible Lutron system, controller model, tape length, total zone length, power supply or power-interface method, wiring family, connector type, mounting location, RF placement, service access, and programming expectations.

Choose a tunable white controller when the project requires adjustable white light, warm evening scenes, brighter task scenes, or colour-temperature control without RGB colour. Choose an RGB + tunable white controller when the project needs saturated colour scenes in addition to tunable white performance.

Each Lumaris controller zone must be planned with the correct tape length, wire type, connector type, and power method. Do not treat the controller as interchangeable across tape families, and do not use additional power capacity as a way to exceed approved tape-light or controller limits.

Similar-looking Lumaris controllers can differ by tape compatibility, channel count, system family, power method, wiring requirements, colour-control behaviour, and accessory requirements. Use the full Lutron model number whenever possible when matching an existing job, preparing a service order, or building a dealer project cart.

Simply Controlled supports Canadian B2B dealers sourcing Lutron Lumaris wireless controllers, tape-light reels, starter kits, power supplies, hardwired interfaces, wiring accessories, connectors, mounting hardware, and RadioRA 3 project materials. Dealer account holders can log in to view pricing, build job carts, and source Lumaris controllers for professional lighting-control installations.

Need help matching the right Lumaris controller? Contact the Simply Controlled team with the system family, tape-light type, colour range, RGB requirement, run length, power plan, wiring path, and project application, and we can help point you toward the correct ordering path.