G.hn Wave 2 Powerline Speeds 2 PoE-Capable Ethernet Ports | PG-9182POE

Comtrend PG-9182PoE G.hn Wave 2 powerline adapter with PoE+

The Comtrend PG-9182PoE is a G.hn Wave 2 powerline adapter with integrated PoE+ output. It uses compatible existing electrical wiring as the network path and can provide data plus PoE power to compatible endpoint devices such as IP cameras, access points, or VoIP phones.

Important: this listing is for one PG-9182PoE powerline adapter with PoE+ output, not a PG-9182PT pass-through adapter, not a PG-9182PT-KIT, not Ethernet-over-coax, and not a standalone PoE splitter. A minimum of two compatible G.hn powerline adapters is required to create a working powerline link.

Best used for

• Powerline networking to a compatible PoE endpoint.
• IP cameras, access points, or VoIP phones where the endpoint power requirement fits the available PoE budget.
• Retrofit installations where running new Ethernet cable is not practical.
• Projects that need both network data and PoE output at the remote adapter location.

Key product details

• Model/SKU: PG-9182PoE.
• Product type: G.hn Wave 2 powerline adapter with integrated PoE output.
• Network path: compatible electrical wiring.
• Rated powerline speed reference: up to 2000Mbps PHY.
• PoE reference: 30W power budget as listed for this product.
• Typical endpoint categories: compatible PoE cameras, access points, and VoIP phones.
• Minimum link requirement: at least two compatible G.hn powerline adapters.

PG-9182PoE vs PG-9182PT

Choose PG-9182PoE when the remote endpoint needs PoE output from the powerline adapter. Choose PG-9182PT when the project needs a standard single powerline adapter with pass-through outlet and Ethernet only. Choose PG-9182PT-KIT when both ends of a standard powerline link are needed in one package.

Compatibility notes

Confirm endpoint power draw, PoE standard, wiring quality, circuit conditions, and installation requirements before ordering. PG-9182PoE is not a 5V PoE splitter, not a 12V PoE splitter, not a GCA Ethernet-over-coax adapter, and not a GRID structured PoE product.

Frequently asked questions

Does this work by itself?
No. At least two compatible G.hn powerline adapters are required to create a working link.

Is this the same as PG-9182PT?
No. PG-9182PT is a standard pass-through powerline adapter. PG-9182PoE is the powerline adapter with PoE output.

Can this replace a PoE splitter?
Do not treat it as a direct replacement for a PoE splitter unless the endpoint, voltage, PoE standard, and installation requirements are confirmed compatible.