Eurofase Single Duplex Heater Switch | EFSWP Series
Eurofase Single Duplex Heater Switch | EFSWP Series
Available to order — ships from incoming stock
Typically ships in 3–6 Business Days (Western Canada) · 4–8 Business Days (Eastern Canada)
SKU:EFSWPS
Eurofase single duplex heater-switch accessory for manufacturer-approved manual-control applications. The original Canadian supplier listing contains two finished models, EFSWPS (stainless steel) and EFSWPW (white).
Product variants
- EFSWPS — single duplex heater switch, stainless steel
- EFSWPW — single duplex heater switch, white
Electrical compatibility
Use only in wiring arrangements expressly approved by Eurofase and the licensed installer. Switch or rocker ratings must not be interpreted as permission to directly switch a particular 4,000 W or 6,000 W heater, or to combine loads through shared terminals. Circuit isolation, breaker sizing and any required contactor/control box are project-specific. This switch is not yet approved as a direct EF40 or EF60 solution.
No heater, control box, disconnect or installation work is included.
Manufacturer documentation
Eurofase technical documents and installation instructions. Verify the exact model, installation conditions and current documentation before ordering. All items are subject to final availability, shipping and approved dealer pricing.
Manufacturer electrical reference — single duplex
Eurofase's published duplex/two-single-pole wiring sheet specifies the limits per individual rocker. These values are not a combined capacity rating for the complete device and are not a declaration of compatibility with an arbitrary heater model.
| Switching arrangement | Two single-pole, single-throw rocker switches per duplex position; on/off or approved staged-element operation, not continuous dimming |
|---|---|
| Maximum per rocker | 20 A, subject to applicable wiring and circuit requirements |
| Manufacturer reference voltage range | 120–277 VAC in the duplex wiring instruction; verify the exact connection configuration |
| Published recommended power limits per rocker | 120 V: 1,800 W; 208–220 V: 3,000 W; 240–277 V: 4,000 W, without overriding the 20 A rating |
| Conductors and installation | Use copper/copper-clad conductors as specified; licensed-electrician installation and applicable Canadian Electrical Code requirements |
Project-specific verification: Confirm the appropriate manufacturer wiring diagram, separate-feed vs shared-feed treatment, individual heater-element loads, circuit protection, and any required contactor or other control equipment. Do not assume this product can directly switch an entire EF40 or EF60 heater merely from the switch's published rocker rating. Eurofase's manual says its break-off fin is removed only for an authorized separate-feed arrangement.
Manufacturer installation documents
- Eurofase switch family specification (PDF) — manufacturer model/finish identification, including EFSWP and EFDWP.
- Eurofase duplex/two-single-pole switch wiring instructions (PDF) — circuit example, 20 A rocker limit, conductor and separate-feed requirements.
Warranty & Manuals
Warranty & Manuals
Spec / Sell Sheets
Spec / Sell Sheets
