GRID / POE-JACK · THE INSTALLER ADVANTAGE

Find the right port. Finish the job.

Port-Trace keystones, matched LED identification equipment and job-ready systems for installers.

Compatible hardware · Canadian dealer support · Project BOM assistance

GRID Port-Trace networking equipment

Know which connection you're working on.

01

Install compatible jacks

Terminate your runs with appropriate Port-Trace keystones.

02

Connect the tracer

Operate the matching LED activation tool according to the manufacturer's instructions.

03

Identify the connection

Find and document the corresponding indicated port.

Port-Trace requires compatible LED-equipped hardware. This is not a universal Ethernet cable tracer.

INSTALLER STARTING SYSTEMS

Start where your crew is today.

Already equipped? Buy jacks. First job? Add the tracer. Rolling out across crews? Start complete.

EQUIPPED CREWS

Port-Trace 25-Pack

Port-Trace 25-Pack

25 LED-identifiable keystone jacks in a verified core colour. Tracer and termination equipment are separate.

Price and availability on request

Request availability

FIRST JOB · START HERE

LED activation tracer
Component pictured; verify exact kit contents.

First-Job Trace Kit

25 keystones and one LED tracer. Requires a separate compatible termination tool.

Price and availability on request

Request availability

MULTIPLE INSTALLATIONS

One-Motion termination tool
Component pictured; verify exact kit contents.

Crew Conversion System

125 jacks in five 25-packs, one LED tracer and one One-Motion termination tool. Confirm the colour mix with our team.

Price and availability on request

Request availability

Need the termination tool too?

First-Job Complete adds the One-Motion tool to 25 jacks and the LED tracer.

Two tools. Two different jobs.

GRID POEJK-LEDT LED activation and RJ45 network testing tool

POEJK-LEDT

LED activation tracer

Identify compatible Port-Trace connections using GRID's documented procedure.

Grid POE-Jack POEJK-PUNCH-JK one-motion keystone termination tool for compatible 180-degree flat-pin RJ45 jacks

POEJK-PUNCH-JK

One-Motion termination tool

Terminate the matching keystone. This tool does not identify ports.

ACTUAL INSTALLATION EVIDENCE

Watch a real port being identified.

Our field demonstration will show the tool connection, LED response, setup, and any failures. No invented speed claim.

Real demonstration not yet available. Request a hands-on demonstration.

PORT-TRACE · FIELD TEST

ACTIVE NETWORK PROJECTS

Four wired ports from one suitable powered uplink.

Active POE-Jack provides four Gigabit wall ports from a suitable IEEE 802.3bt Type 4 Class 8 uplink (up to 95W input). Its outputs share a 60W PoE budget with 30W maximum per port. Check actual source power and connected device requirements.

Request availability

PROJECT SUPPORT

Make the first job easy to repeat.

Send your colour mix, number of outlets, power requirements and existing equipment. We'll help scope an honest bill of materials.

Browse the GRID catalogue

Straight answers

Can I trace any existing Ethernet cable?

No. The tracing workflow requires compatible Port-Trace hardware and the correct configuration.

Is the LED tracer also the termination tool?

No. The tracer identifies compatible connections; One-Motion terminates the keystone.

Can I mix colours in a 125-jack system?

Our team will confirm a mix of five 25-packs before accepting the order.